background image

Symbol

Description

V

,

mV

V:
mV:

Volts. The unit of voltage.
Millivolt. 1x10  or 0.001 volts.

A,mA,µA

A:
mA:
µA

:

Amperes (amps). The unit of current.
Milliamp. 1x10  or 0.001 amperes.
Microamp. 1x10  or 0.00001 amperes.

Ω

Ω

Ω

,K ,M

Ω

:

k

Ω

:

M

Ω

:

Ohm. The unit of resistance.
Kilohm. 1x10  or 1000 ohms.
Megohm. 1x10  or 1,000,000 ohms.

Hz,KHz,MHz

Hz:
KHz:
MHz:

Hertz. The unit of frequency.
Kilohertz. 1x10  or 1000 hertz.
Milohertz. 1x10  or 1,000,000 hertz.

Hz,KHz,MHz

F:
mF:
μF:
nF:

Farad. The unit of capacitance.
Millifarad. 1x10  or 0.001 farads.
Microfarad. 1x10  or 0.000001 farads.
Nanofarad. 1x10  or 0.000000001 farads.

-3

-3

-6

3

6

3

6

-3

-6

-9

3. Technical specifications

3.1 General specifications

Safety Rating: CAT III 600V, pollution degree of 2
Operating Altitude: <2000m
Operating Temperature/Humidity: 0~40

, <80% RH

Storage Temperature/Humidity: -10~60

, <70% RH, 

                                                        remove battery
Max. Input between terminals and earth ground: 600V DC 
          or AC True-RMS
Fuse Protection: A/mA ranges: FF 400mA H 1000V 
                             10A range: FF 10A H 600V
Display: 3³⁄4 digit LCD display
Overload Indication: Display shows “OL”

Low Battery Indication: When battery voltage drops below 
                                         normal operating voltage, “     ” is 
                                         shown on the display
Polarity Indication: Display automatically displays “-”
Power Supply: DC 9V (NEDA 1604, 6F22 or 006P)
Wireless Communication Distance: 
                                                     Indoor/Outdoor: <10m
Supported App OS: iOS: 7.0 and above
                                  Android: 4.3 and above
Size(LxWxH): Approx. 92x188x50mm
Weight: Approx. 432g

Accurancy: ±( % r digits ) at 18

~28

 with a 

relative humidity of <80%; guaranteed for a period of 
one year.

3.2 Technical indicators
3.2.1 Dc voltage

400mV

4.0V

40V

400V

600V DC or AC True-RMS.

600V

±( 1% of r 5 digits )

- Max. input voltage: 600V DC or AC True-RMS.

400mV

4.0V

40V

400V

3.2.2 Ac voltage

±( 1.0% of r 8 digits )

09

10

600V

±( 1.2% of r 8 digits )

Summary of Contents for MS8361D















Reviews: