908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
QMVM-L SERIES
QUANTUM SERIES MEDIUM TEMP LOW PROFILE
OPEN DISPLAY MERCHANDISERS
TECHNICAL SPECIFICATIONS
1082-1/12-web
©Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.
All specifications subject to change without notice.
LISTINGS
HOOKUP
BID SPECIFICATIONS
Item no. QMVM-_______L
Provide__________( ) Quantum Series
Medium Temp Low Profile Open Display
Merchandiser(s), Master-Bilt model no.
QMVM-_______L.
Merchandiser to be constructed of 24 gauge
painted textured galvanized steel interior and
exterior and will be equipped with an elec-
Electrical hookup: 115v
Plumbing hookup: Requires connection
to customer’s drain
tronically controlled monitoring system.
Merchandiser to have two-position
shelves adjustable in 1" increments, perfo-
rated interior back wall, independent shelf
lighting and price tag molding. Merchan-
diser will also contain 2" foamed-in-place
“zero ODP” urethane insulation.
The refrigeration system is to be self-
contained, with front condenser air intake
and rear air discharge and use R-134a refrig-
erant. The temperature range is 34° to 41°F
(1° to 5°C). Merchandiser to have standard
limited three year extended compressor
warranty and two year limited parts and
labor warranty. It is also to be UL and C-UL
listed and UL EPH classified.
RECOMMENDED OPERATING CONDITIONS
• Merchandisers designed to hold product
in the 34° to 41°F (1° to 5°C) range
• Designed to operate in air-conditioned
stores where the maximum temperature is
75°F and the maximum relative humidity
is 55%
• Should not be installed in direct sunlight
• Should not be installed near HVAC vents,
fans or doorways that will disrupt airflow
and compromise the function of the air
screen inside the case
• Bottom shelf should not be loaded such
that the front air intake is obstructed
• Floor drain should be properly trapped
• Factory installed controls should not
be altered, removed or replaced without
consent of the factory
• Product must not be displayed in the cold
air curtain
MODEL
DIMENSIONS
(in.)
DIMENSIONS
(mm)
VOLTS
AMPS*
UNIT
H.P.
NO. OF
SHELVES
STANDARD
SHELF
SIZE
(in inches)
CAP.
CU.
FT.
SHIP
CU.
FT.
SHIP
WT.
LB/KG
L
D
H
L
D
H
QMVM-36L
36
30
60
914
762 1524
115
14.8
1/2
2
14 x 31
1
/
8
11.2
67.0
490/223
QMVM-48L
48
30
60
1219 762 1524
115
14.9
3/4
2
14 x 43
1
/
8
15.4
81.0
580/264
*If condensate evaporator pan accessory is used, it must be field installed
and requires a dedicated 20 amp, 120 volt circuit.
PLAN VIEW
SIDE VIEW
ELEVATION VIEW
NEMA 5-20P
