4
Important Notes:
To operate you will need a precision-filled standard G30/G31
barbecue LP gas cylinder with external valve threads.
Use standard flexible tube with length less than 1.5 m. The tube
shall be readily visible across its entire length for inspection after
installation.
Danger:
You must have the proper regulator and bottle in order for the
barbecue to operate safely and efficiently. Use of an incorrect or
faulty regulator is dangerous and will invalidate any warranty.
Further information
Connect LP Gas cylinder
Before connecting, be sure that there is no debris caught in the
head of the LP tank, head of the regulator valve or in the head
of the burner and burner ports.
Connect gas line to tank by turning knob clockwise until it stops,
make sure that the tube is not subject to twisting.
Disconnect LP Gas cylinder
Before disconnecting make sure the LP gas tank valve in “CLOSED”
Disconnect gas line from LP gas cylinder by turning knob
counterclockwise until it is loose.
After connecting to gas cylinder, a leak testing is necessary.
Danger:
When changing the gas container, care must be taken
to keep away from any source of ignition.
Leak Testing (To be performed in a
well-ventilated area)
Confirm all barbecue control knobs are in the off position.
Open the gas control valve on gas cylinder.
Check for leaks by brushing soap solution over all gas system
joints, including all valve connections, hose connections and
regulator connections.
NEVER USE AN OPEN FLAME to test for leaks at anytime.
If bubbles form over any of the joints, there is a leak.
Turn off the gas supply and retighten that joint. Repeat the test.
If bubbles form again, stop trying; contact your local dealer for
assistance.
Leak test annually, and whenever the gas cylinder is removed or
replaced.
Please retain this manual
for future reference
Produced in China
3+1 Burner gas grill
Assembly instructions
