Page 15
REMOVING THE CHUCK (FIG. 13)
FIG. 13
Chuck screw
1. Remove the battery pack from the drill/
driver.
2. Open the chuck jaws.
3. Use a Philips screwdriver (available
separately) to remove the chuck screw
by turning it in a clockwise direction.
NOTICE: The chuck screw has left-handed
threads.
4. Insert a 3/8” hex key (available
separately) into the chuck and securely
tighten the chuck jaws onto the hex
key. Tap the hex key sharply with
a mallet (available separately) in a
counterclockwise direction. This will
loosen the chuck on the spindle. It can
now be unscrewed by hand.
TO RETIGHTEN THE CHUCK
1. Remove the battery pack from the drill/
driver.
2. Open the chuck jaws.
3. Insert a 3/8” hex key (available
separately) into the chuck and securely
tighten the chuck jaws onto the hex key.
Tap the hex key sharply with a mallet
(available separately) in a clockwise
direction. This will tighten the chuck
onto the spindle.
4. Open the chuck jaws and remove the
hex key.
5. Use a Philips screwdriver (available
separately) to turn the chuck screw
counterclockwise to tighten it.
MAINTENANCE
Summary of Contents for 241-0461
Page 18: ...Page 17 NOTES...
