Page 6
SAfETy INSTRUCTIONS
SERVICE
1.
Have your power tool serviced by a
qualified repair person using only identical
replacement parts.
This will ensure that
the safety of the power tool is maintained.
SPECIfIC SAfETy RULES fOR
CORDLESS DRILL/DRIVER
1.
Use the tool only with the batteries and
charger listed below:
.
battery pack
Charger
252-8024
252-8028
252-8029
252-8030
252-8031
252-8032
252-8033
252-8034
252-8036
252-8037
252-8044
2.
Hold power tools by their insulated
gripping surfaces when performing an
operation where the cutting tool may
contact hidden wiring or its own cord.
Contact with a live wire will make exposed
metal parts of the tool live and shock the
operator.
3.
Use protective gloves when removing
the bit from the tool, or first allow the bit
to cool down.
The bit may be hot after
prolonged use.
4.
Use protective gloves when operating
the tool.
Protective gloves can help to keep
you from being burnt and hurt.
5.
Always wear safety glasses with side
shields.
Everyday glasses have only impact
resistant lenses. They are NOT safety
glasses. Following this rule will reduce the
risk of eye injury.
6.
Protect your lungs. Wear a face or dust
mask if the operation is dusty.
Following
this rule will reduce the risk of serious
personal injury.
7.
Protect your hearing.
Wear hearing
protection during extended periods of
operation. Following this rule will reduce the
risk of serious personal injury.
8.
keep your hands away from the motor-
housing vents.
Hot gas comes from the
vents during operation.
9.
Do not operate the tool at full-load for
more than 30 seconds, as this can cause
the motor to become too hot, which may
damage the motor.
10.
Release the trigger immediately when
the screws are tightened to avoid breaking
the screw.
11.
Secure work.
Use clamps or a vise to
hold work when practical. It is safer than
using your hand and frees both hands to
operate tool.
12.
know your power tool.
Read operator’s
manual carefully. Learn the tool’s
applications and limitations, as well as the
specific potential hazards related to this
tool. Following this rule will reduce the risk
of electric shock, fire, or serious injury
.
