18
Lowes.com/masterforge
®
ASSEMBLY INSTRUCTIONS
23. Install regulator hose lock
Hoop the regulator hose into the
regulator hose lock (N). Align the
holes of regulator hose lock with the
hole on the back of front leg of left
leg assembly (O). Tighten the
regulator lock with M4 x 12 screw (KK).
Hardware Used
M4 x 12
Screw
kk
x 1
24. Install battery
Install an AA battery (LL) into the igniter
assembly by unscrewing the igniter
button. Insert AA battery (LL) negative
end first into igniter assembly. Place
the igniter button back over the AA
battery (LL) and hand tighten. Press
igniter to test. If igniter is not
working, please refer to the
Troubleshooting section.
Hardware Used
AA Battery
LL
x 1