2 |
P a g e
Helios 75K Floodlight System – User Manual
1.
S
AFETY
”READ AND
UNDERSTAND
ALL
INSTRUCTIONS” – Failure to follow the
SAFETY RULES listed below and other
safety precautions, may result in serious
personal injury.
Work Area Safety
•
Do not operate light in explosive
atmospheres, such as in the
presence of flammable liquids,
gases or dust.
Excessive heat from
electrical sources may ignite dust or
fumes.
•
Do not store or operate around
rotating/moving equipment.
The
electrical cord may become
entangled in rotating equipment or
severed by moving parts which may
cause electrical shock to nearby
personnel.
•
Do not handle the light while it’s
operating in open-air.
Excessive
heat generated in open-air operation
may put personnel at risk of burns if
handled.
Electrical Safety
•
Before plugging in the light, be
certain the outlet voltage supplied
is compatible with the voltage
identified on the name plate.
Incompatible outlet voltage may
result in serious hazards and/or
damage to the equipment.
•
Do not expose the Power Console
to wet environments.
Water
entering the Power Console will
increase the risk of electric shock.
•
Never use the cord of the Power
Console to carry or support the
light. Keep cord away from heat,
oil, sharp edges or moving parts.
Damaged cords increase the risk of
electric shock.
Personal Safety
•
Do not look directly at the source
of light while it is energized.
Temporary or permanent vision
impairment may occur as a result.
•
Be sure the dimmer knob is turned
to the full “CCW” position before
plugging into an electrical outlet or
connecting the light cord.
Personal
injury, such as vision impairment,
may occur if the light is energized in
full power in proximity to personnel.
•
Check that all cord connections
are tight and secure.
Loose or
partial electrical connections may
increase the risk of electric shock
and/or damage to the components.
•
Do not store anything on top of the
Power Console or light panel.
Placing items on top of the Power
Console or light panel obstructs the
view of warning and operating
information and may cause damage
to the component.
SAVE THESE INSTRUCTIONS!
