3 |
P a g e
Helios 75K Floodlight System – User Manual
”READ ALL INSTRUCTIONS” – Failure to follow the SAFETY
RULES listed below and other safety precautions, may result in
serious personal injury.
Operation and Care
•
Ensure the cover of the light panel
is tightly fastened.
If loose, water
may enter the enclosure and cause
damage to the lighting components.
These are factory torqued to 60 in-
lb.
•
Ensure all cord connectors are free
of moisture and are clean before
making connections.
Dirt or
moisture may cause the light to
malfunction and/or may decrease the
life expectancy of the components.
•
Handle, package, and use all
components with care.
The lens of
the light panel is made of an impact-
resistant plastic but can fracture if
struck with excessive force causing a
hazard and/or Foreign Material risk.
•
Do not position the light panel in
close proximity to moving,
mechanical equipment.
Temporary
and/or permanent damage to the
components may occur if struck,
reducing performance of the light or
rendering it inoperable.
Service
Disconnect plug
from Power
Console before
performing any assembly, adjustment or
repair to avoid possible injury.
•
Service and/or repair must be
performed only by Master-Lee
personnel with the exception of
lens replacement.
Service or
maintenance performed by
unqualified personnel may result in
incorrect reassembly which could
cause serious hazard.
•
Do not remove the cover of the
Power Console.
Removal of the
cover increases the risk of damage to
internal components and electrical
shock to personnel.
•
Lens and O-Ring shall be replaced
with the manufacturer specified
parts as outlined in this document.
Failure to use the specified parts may
lead to product failure.
•
Decontamination or cleaning of the
lighting assembly shall be
performed with care.
Hand-
washing with wet rags or a mild
cleaning solution may be performed
on the lighting assembly and cord.
Use of pressure applied water may
damage the components.
SAVE THESE INSTRUCTIONS!
