2
English
How to set your combination
You can set your own personal combination by following these instructions:
The opening combination is preset at 0-0-0.
Turn the dial to the preset combination 0-0-0.
Remove the lower tray from the lock box to expose the
lock reset button on the back of the lock mechanism.
Move the reset button to position A.
Turn the dials to set your desired
combination. Write down your combination
immediately so you don’t forget.
Move the reset button back to position B.
The lock will now open to your own combination.
To change your combination repeat steps 1-5 above.
NOTE:
There is no override code for this lock box.
Store your code at www.masterlockvault.com to avoid being locked out.
How to install tethering cable
Open the lock box.
Wrap the cable around the object inserting the end of
the cable through the loop in the cable. (A)
Put the end of the cable (non-loop end) in the slot
on the back left corner of the lock box. (B)
Close lid and lock the box.
Registration:
To be eligible for warranty coverage, the original purchaser must register the product
online at http://www.registermysafe.com/.
1
2
3
4
5
1
2
3
4
A
B
