Master Lock 1500iD Speed Dial
™ Directional Dial Combination Padlock
Question: Where is the default combination located?
Answer:
The preset combination will be a series of four arrows which will look like the example code below (the
preset combination is different for each lock):
←
↑
→
↓
The preset combination is listed in the upper right hand corner of the instructions that were in the cavity
on the back of the package, near the base. Note: You will have to cut open the package to remove the
instructions and preset combination.
Question: Why is my directional password no longer working for my set combination?
Answer:
The 1500iD lock is sensitive and reads all movements; certain types of touch seem to work better for
some users to help ensure the correct combination is entered. Please try these suggestions:
1. Give the shackle two quick squeezes to "clear" it rather than two slow, deliberate squeezes.
2. In a quick manner, allow the button to move back to center mostly on its own, without over-guiding
it.
3.
Don’t allow the button to bounce past the center position or it will read the adjacent position as part
of the entry.
Question:
Why does my lock open with “NO” combination?
Answer:
It may be possible that the lock is set to "no" combination. Please try resetting the lock again by
following the instructions below:
1. Place lock in the open position.
2. On the back of the lock, slide the reset lever into the “up” position.
3. Insert the shackle into the lock and squeeze firmly twice to “clear” it.
4. Pull up on the shackle to open the lock.
5. Enter your new combination.
6. On the back of the lock, slide the reset lever into the “down” position.
