320.340.6464
4
TOOLS
PARTS
None
Press the Drain Cap Gasket into the Drain Cap until fully seated.
Attach the Drain Tether to the top of the Drain Cap.
1.
Creates Drain Cap Assembly
Locate Sprayer Tank drain outlet.
Place other end of Tether over tank drain outlet.
Thread Drain Cap over drain until hand tight.
TOOLS
PARTS
None
2.
Applies Drain Cap to Drain Port
TOOLS
PARTS
None
Un-thread Tank Lid from Sprayer Tank.
Fold the thin side of the “T” end of the
Tank Lid Tether onto the tether itself and
insert from bottom of Tank Lid.
Pull Tank Lid Tether through top of Tank
Lid so the ball end remains inside the
Tank Lid.
Creates Tank Lid Assembly
3.
Thread Tank Lid Assembly back onto the Sprayer Tank.
Thread the “T” end of Tether through the hole next to tank
opening.
TOOLS
PARTS
None
4.
Tethers Tank Lid to Sprayer Tank
SPOT SPRAYER ASSEMBLY
