11
DO NOT DIVE.
GLOSSARY OF SWIM SPA TERMINOLOGY
1. TheRapy JeTS
Your new swim spa features a variety of jet styles. All jets, regardless of style
return the water to the swim spa. Air is mixed with the water by using the air
controls creating a gentle to most vigorous massage. Water flow is adjusted
by simply turning the outer face of the jet.
2. JeT dIveRTeR vaLve
Located on the topside of the swim spa, this valve physically diverts the
flow of water from one jet zone of the swim spa to another jet zone.
Be sure that no sand or particles are brought into the swim spa as they
can cause the diverter to seize up. It is best to turn the diverter valve
only when the pump is turned off.
3. aIR cONTROL vaLveS
These are located around the top of your swim spa. You may increase
or decrease the force of your jets by opening or closing the air control
valves. Typically, one dial controls the air to water ratio and mix to one
group of jets. When not in use the air controls should be kept in the
closed position, as air bubbles tend to cool the water.
4. TOpSIde cONTROL paNeL
You may safely control all functions from inside or outside your swim spa using the
Topside Control Panel. This Panel is used to control the water temperature, pumps, the swim
spa light, automatic filtration cycles and other advanced functions. The digital display will
give you a constant temperature readout and will notify you in case of certain malfunctions.
Several user programmable functions are also available.
5. SWIm JeTS
The swim jets are operated by directing the water flow from the pumps to the jets located in
the swim end of the spa by turning the diverter valves.
6. peRSONaL RemOTe cONTROL
Your swim spa has an additional remote which allows the user to con-
trol the stand up jet therapy cove. By pressing the control one time, you
will activate the pump. Press the pad again to turn the pump off.
7. eQUIpmeNT acceSS paNeL
Located behind the side panel below the Topside Control Panel, this area houses the major
components responsible for the swim spas operation. Those components include the pumps,
heater, control panel box, Ozonator, and LED light system. Pump and equipment placement
may vary by model.
