background image

36

DO NOT DIVE.

23

DO NOT DIVE.

bluetooth operation

Pairing Bluetooth Devices:

1.  

Open the Bluetooth setup program on the 
mobile device and activate the Bluetooth 
feature.

2.

   Press the 

 

button to turn on the entertain-

ment center.

3.   

From you mobile device scan for available 
devices. Select ”AQUAVIBE” to connect to 
the unit.

4.   

When the mobile device has been paired “

” will appear in the entertainment cen-

ter’s display.

5.  

Press the 

MODE

 button until “BT AUDIO” 

appears in the display. Bluetooth audio 
from your mobile device can now be played 
through the entertainment center.

Note 1: 

A previously paired Bluetooth mobile 

device will automatically connect to the enter-
tainment center when “BT AUDIO” is selected 
using the 

MODE

 button (if it is within range).

Note 2: 

If the Bluetooth mobile device is 

already paired with the entertainment center, 
select “AQUAVIBE” on your phone and touch 
“Connect”.

Bluetooth Operation:

Note: 

Devices with AVRCP 1.3 or above will 

display text, all other device will simply show 
“BT AUDIO”

Play/Pause Button: 

Press the 

 

button to pause 

the Bluetooth playback. Press again to resume 
playback. 

Note: 

The Entertainment Center dis-

play will not show the playback is pause. The 
mobile device will show that the playback is 
paused.

Changing the Track:

Press the 

 

TRACK

 button to select a higher 

track. Press the 

 

TRACK

 button to select a 

lower track.

Sound Controls: 

Use the sound controls on the 

main unit to adjust the volume and sound qual-
ity. 

Note: 

For optimum sound quality make sure 

the media volume on the device is set at 75% 
or greater.

Random Controls: 

Press the 

RDM

 button for 

random controls. Selecting “RDM ON” will 
randomly play tracks. Selecting “RDM OFF” will 
cancel random play.

Repeat Controls: 

Press the 

RPT

 button for repeat 

controls. Selecting “RPT ONE” will repeatedly 
play a track. Selecting “RPT ALL” will repeat-
edly play all the tracks. Selecting “RPT OFF” will 
cancel repeat play

Note: 

During Bluetooth audio streaming the multi-

media device (IPHONE/smart phone) can be placed 
in the dock and charged by the USB socket.

Summary of Contents for 2014 H2x

















































Reviews: