MASTER SPA - LEGEND SERIES - CONTROLS
Timeouts refer to a preset length of time that a function is programmed to operate before shutting off
automatically. Certain conditions (filters or freeze) can cause a function to operate longer, while faults
can cause a function to operate for a shorter length of time. The system keeps track of timeouts
regardless of other conditions occurring.
In multi-button sequences, if buttons are pressed too quickly in sequence, they may not register.
36
DO NOT DIVE.
Initial Start-up
When your spa is first actuated, it will go into Priming mode (after displaying some configuration
information). The Priming mode will last for up to 4 minutes and then the spa will begin to heat and
maintain the water temperature in the Standard mode. You can exit Priming mode early by pressing
“Warm” or “cool”.
Icon Legend
Heat Icon –
Indicates different stages of heating.
Jets Icon –
Spins fast on high speed; spins slow on low speed.
Light Icon –
Press the “Light” button to turn the light on and off. If you wish to
change the “function” of the lights, turn the lights off, then on within 5 seconds.
If you wish to leave the lights in the same “function” setting for the next use, turn
the lights off and do not turn back on for at least 5 seconds.
