51
DO NOT DIVE.
101
DO NOT DIVE.
INITIAL SWIM SPA SETUP
7.
It may be necessary to bleed air from the pump(s) in your swim spa if, after start up, your
swim spa pumps are turning on and off but you do not have water flow from the jets in your
swim spa.
Due to the nature of water flow and hydro-therapy pumps, please be advised that air locking
of pumps may occur. Master Spas has taken measures to reduce the possibility of this, but
it still may occur, especially after refilling a swim spa. This is not a service covered under
warranty and service charges may apply.
To relieve an airlock situation,
loosen the pump union on
the discharge of the pump.
This pump union is indicated
by an arrow in the picture.
Water should leak out of the
union once the air has been
removed. Tighten the union
and test the pump for proper
operation. Repeat this process
if needed.
8.
Adjust water chemistry according to the instructions provided in the Water Maintenance
section.
9.
Your swim spa water will heat approximately 3 to 4 degrees Fahrenheit per hour (1 to 2
degrees Celsius) with the cover placed on the swim spa. This varies depending on the size of
the swim spa and ambient temperatures.
10.
Step into the soothing waters of your Master Spa swim spa!
Relax and enjoy.
WATCH HOW-TO VIDEOS:
masterspas.com/video-tutorials
Airlock
Pump Union
Slice Valve
