100
DO NOT DIVE.
NAVIGATION
Navigating the entire menu structure
is done with 2 or 3 buttons on the control
panel.
Some panels have separate
WARM
(Up)
and
COOL
(Down) buttons, while others
have a single
TEMPERATURE
button. In the
navigation diagrams Temperature buttons
are indicated by a single button icon.
The
LIGHT
button turns the lights (if equipped) inside your swim spa on or off. If your swim spa is
equipped with LED Light System, turn the lights on and off repeatedly within a couple of seconds
to rotate through available color schemes.
Typical use of the Temperature button(s) allows for changing the Set Temperature while the
numbers are flashing in the LCD. Pressing the
LIGHT
button while the numbers are flashing will
enter the menus.
The menus can be exited with certain button presses. Or, simply waiting for several seconds will
return the panel operation to normal.
Main Screen
SET
While the Temperature is
still flashing, press Light.
SET
RANGE
READY
RANGE FLTR1
Main Screen
READY
RANGE FLTR1
READY
SET
Waiting Several Seconds in the Main Menu
will allow the display to revert to the Main Screen.
Most changes are not saved unless Light is pressed.
Refer to Key above.
KEY
POWER-UP SCREENS
Each time the System powers up, a series of numbers is displayed.
After the startup sequence of numbers, the system will enter Priming Mode.
SWIM SPA CONTROLS - MP30/TP600
MAIN MENUS
83
DO NOT DIVE.
