28
DO NOT DIVE.
Allow the Weir Door
to fall back towards
the filters in order
to remove the
filter housing
.
Slide Faceplate Up
and Out Slowly
to Remove
Pull Up on Plastic
Skimmer Plate
to Remove
Turn Filter
Counter-clockwise
to Remove
Filter Weir with Front Access
REGULAR MAINTENANCE PROCEDURES
103
DO NOT DIVE.
NOTE: These maintenance procedures are the responsibility of the swim spa owner to perform.
These procedures are not covered by the swim spa warranty.
Pull Up to Remove
Floater Assembly
Turn Filters
Counter-clockwise
to Remove
Vane Teleweir Filter Housing
NOTE:
When lifting the housing, be careful not to lift too far, as you could break the floating weir
door. Damage to weir door is not warranted.
CLEANING YOUR FILTER ELEMENTS
(continued)
3.
With a garden hose, spray each element under pressure. Monthly, the standard filter elements
should be soaked in a filter cleaner. Do not soak EcoPur
®
element in a filter cleaner. The EcoPur
®
element should only be rinsed with fresh, clean water if necessary. Check with your Master Spas
dealer for details on cleaning and/or filter replacement recommendations.
4.
The EcoPur
®
element should be replaced every 6 months. The standard filter should be cleaned
regularly and will typically last approximately 1 year. Bather load, usage and water quality will effect
the longevity of the filters and require more frequent cleaning or replacement.
Remove Filter Lid
Turn Filters
Counter-clockwise
to Remove
Filter Weir with Top Access
