EN
comes with the replacement valve.
I
f the board is losing air and the valves are good, it probably
has a
small puncture.
S
mall punctures can be repaired easily and
permanently.
S
pray around the board until air bubbles become visible
and mark the position of the leak.
I
f you do not find air bubbles, inflate
the board to maximum
air pressure and try to listen to find the leak,
if
you can narrow the area down, return
with a spray bottle to identify
the source of the leak.
Repair Kit
P
unctures less than 1/8
”
in size can be repaired simply without a patch.
D
eflate your board, then clean and dry the area to be repaired.
A
pply
a small drop of glue to cover the puncture, and let it dry 12 hours.
I
f your board needs repair,use the patches in the repair kit and follow
these steps:
D
eflate the board completely, lay it flat and wait for it to dry.
C
ut a patch that is 2 inches larger than the tear/rip all the way
around.
U
se alcohol to clean the repair area.
A
pply three coats of adhesive to the patch and the board.
W
ait 5
minutes in between each coat.
P
lace the patch over the tear/rip.
T
he adhesive will react quickly, so
make sure the positioning is precise/accurate.
U
se the roller to
