en
►►7.
TROUBLESHOOTING
FAULT
CAUSE
SOLUTION
The display does
not work
1. No power supply
2. Defective equipment
1a. Make sure that the device is con
-
nected to the power supply
1b. Contact a support centre
2. Contact a support centre
There is no air
flow or it is very
low
1. Rear side air vent clogged
2. Defective equipment
1a. Keep the rear part of the cooler
away from walls that may obstruct
the airflow
1b. Remove any objects from the air
vent
1c. Contact a support centre
2. Contact a support centre
The device does
not respond to the
commands
1. Defective equipment
1. Contact a support centre
The device leaks
water
1. The drainage plug is loose
2. The drain is dirty and the
drainage plug does not fully
close
3. The tank leaks
4. The panel is dripping
1. Close the plug
2. Clean the drain and close the plug
3. Contact a support centre
4. Contact a support centre