English–17
1 609 929 L48 • 15.6.07
Intended Use
The machine is intended for cutting, roughing, and
brushing metal and stone materials without using
water.
For cutting metal, a special protection guard for cut-
ting (accessory) must be used.
With approved sanding tools, the machine can be
used for sanding with sanding discs.
For damage caused by usage other than intended,
the user is responsible.
Product Features
While reading the operating instructions, unfold the
graphics page for the machine and leave it open.
The numbering of the product features refers to the
illustration of the power tool on the graphics page.
1
Release lever for protection guard
2
Spindle lock button
3
Thumbwheel for speed preselection
(EWS 125-ES)
4
On/Off switch
5
Auxiliary handle
6
Grinder spindle
7
Protection guard for sanding
8
Protection guard for cutting*
9
Mounting flange with O-ring
10
Grinding/cutting disc*
11
Clamping nut
12
Two-pin spanner
13
Quick-clamping nut**
14
Hand guard*
15
Rubber sanding plate*
16
Sanding sheet*
17
Round nut*
18
Cup brush*
*The accessories illustrated or described are not
included as standard delivery.
**Depending on version
OBJ_BUCH-413-001.book Page 17 Friday, June 15, 2007 8:03 AM
