Henan Master Machinery Co., Ltd
Tel:(+86)17737606271
www.mastermachinerys.com
5
ground.
12. The tank lid must fit tightly. Shut off fuel lever, if available when
stopping the engine. For long distance transports of machine
operated by fuel or fuel-mixtures, the fuel tank has to be drained
completely.
13. Do not smoke or handle open fire near this machine.
SAFETY CHECKS
1. Before install the sheet saw, wipe up hole of the saw and plywood.
2. Keep the cutting blade guard in the bottom most location before the
starting engine.
3. Keep the cutting blade away from roadblock when the starting
engine.
4. Check V-belt tension-retension when the machine working.
5. The cutting blade is in proper condition before starting operation
machine. Keep the machine balanced when the working.
6. Check the water lever when the machine working. Refill the water
tank when the water falling half of the water tank, or straight using
another wellhead to water the cutting blade.
7. To avoid the machine librating from portrait swaying, the main shaft
must be tie in with saw.
8.
The sheet diamond is used for cutting bitumen, water concrete
(from 48hrs to 28days), sandstone, sandiness brick, hatchway brick,
and sandiness limestone and so on. Do not cut material as follows:
long-playing water concrete, rigidity brick or harden surface,
savageness stone.
9. Make sure the cutting blade straight cuts forward.
