Henan Master Machinery Co., Ltd
Tel:(+86)17737606271
www.mastermachinerys.com
11
OPERATION
1. After the engine starts, set the speed throttle lever at the low speed
position and warm it up without load for a few minutes. Gradually move
the speed throttle lever toward the high speed position and set it at the
required engine speed.
Notice!
Whenever high speed operation is not required, slow the engine
down (idle) by moving the speed throttle lever to save fuel and extend
engine life.
2. Through the handle guiding cause the machine to travel. The machine
has the high compaction performance when the metal sheet balances on
the surface. Never severity pressure or holding on the handle can
damage the machine. See down fig.