Henan Master Machinery Co., Ltd
Tel:(+86)17737606271
www.mastermachinerys.com
14
mechanically proficient.
Warning!
Please use our company's machine parts; the use of poor-quality
parts may damage the machine.
Regular preventative maintenance and routine service are essential to the
long life of your machine.
1. Disassembly parts
：
Notice
！
Please according to as follow while you need disassemble
parts.
A
、
Disassemble four lock-nuts between foot
plate and pipe-protective, and then remove
foot plate.
B
、
Disassemble
six
screws
(M8×25)
between foot plate and pipe-protective.
C
、
Disassemble six screws (M12×35)
among foot plate, cover and spring cylinder,
then remove foot place.
NOTICE
！
Do not to remove two screws (M12×25) between cover and
spring cylinder when you operate step “c”. Be careful to spring and cover
bounced.
d
、
Install two stud (applicable types) in two
disassembled screw (12×35) positions , then
attach two stud with two nut(M12) (applicable
types) on the cover. See right fig.
e
、
Remove two screw(M12×25) between cover and
spring cylinder, then slowly and equably remove
two nut(M12). See right fig.
CAUTION
！
Keep people away from in the front two
stud when remove spring, serious injury.
CAUTION
！
Do not allow two stud to turn when remove spring. Be careful
