Henan Master Machinery Co., Ltd
Tel:(+86)17737606271
www.mastermachinerys.com
5
stopping the engine. Be careful not to touch the muffler while it is
hot. Let the engine cool before storing it indoors.
5. The max gradient of 30° must not be exceeded when the engine
working. Otherwise, the fuel will spilt and the engine oil into the cylinder,
causing engine failure or other hazards.
6. Wear safety shoes, and eye protection glasses in case of trench
operation where falling sand stones maybe ejected.
7. When the machine working, prohibit the operator from the machine.
8. Do not uses to compacting severity harden or hard surface, such as
block, floor slab, cement block.
9. Placed a machine, we should avoid dumping, roll and fall, etc.
TRANSPORTING AND STORAGE
DANGER!
Keep the engine lever off when transporting to reduce the
possibility of fuel leakage. Turn the fuel valve lever to the OFF position.
1.
Keep the fuel valve lever to OFF position when
transporting.
2.
The load-carrying capacity of the loading ramps has to
be sufficient and the ramps have to be secured such that
they cannot turn over. Make sure that no one be endangered
by machines turning over by slipping or by moving machine
parts.
3.
Drain the used oil when being transported on vehicles, precautions
have to be taken that vibration plates do not slip or turn over.
The following should be taken to prepare your FTR-100 Tamping
Rammer for extended storage.
