Henan Master Machinery Co., Ltd
Tel:(+86)17737606271
www.mastermachinerys.com
8
engine has been running, allow it to cool. Gasoline is highly flammable and
explosive.
C. Refuel carefully to avoid spilling fuel. Do not fill the fuel tank
completely. Fill tank to approximately 1 inch (25mm) below the top of the
fuel tank to allow for fuel expansion. It may be necessary to lower the fuel
level depending on operating conditions. After refueling, tighten the fuel
tank cap securely.
D. Be careful not to spill fuel when filling your fuel tank. Damage caused
by spilled fuel is not covered under warranty.
E. Spilled fuel is not only a fire hazard, it causes environmental damage.
Wipe up spills immediately.
F. Keep the children away from the fuel.
5. Check the oil level sight plugs on the Pipe-protective r daily to ensure the
oil is half way on the site glass. Tamping Rammer capacity is
50 oz.
(1600ml).
The band of lubrication: SAE10-30.
6. Check fastening screws of protective frame and central suspension for
tight fit.
STARTING THE ENGINE
Turn the STOP SWITCH clockwise to the position “1” (ON).
2. Open the fuel cock.
