NEVER LEAVE BLOWER UNATTENDED WHILE OPERATING
OR WHILE CONNECTED TO A POWER SOURCE
© 2015, Pinnacle Products International, Inc.
Industrial Fan Blower / Dryer User’s Manual
DO NOT TAMPER WITH THE UNIT. HAVE
A COMPETENT SERVICEMAN MAKE ANY
NECESSARY ADJUSTMENT OR REPAIRS.
Use only original equipment parts. The use of
alternate or third party components can cause unsafe
operating conditions and will void your warranty.
ELECTRICAL SySTEM
Check the power cable regularly for damage.
If the power cable is damaged, it must be
replaced by qualified person or a service agent.
AIR OUTLETS
Dust and other dirt that can collect in the air
outlet must be cleaned and removed regularly.
HOUSING
Clean the housing with a mild detergent and
water.
EXTERNAL PARTS
Check all external parts to ensure they have
been installed properly. Be alert for unusual
noises.
KEEP MOTOR AND WIRING DRy
DO NOT use a water hose or any pressurized
washing device to clean your blower. If any
electrical elements do get wet, they must be
dried immediately and completely.
Troubleshooting Guide
Risk Of Injury! Always
disconnect the blower from
the power source before maintenance.
WARNING
Problem
Possible Cause
Solution
Motor does not run
1. No power supply to the device.
2. Switch / knob not turned on.
3.
Fan wheel blocked.
4. Air inlet or outlet is blocked.
5. Switch is broken.
6. Loose wiring.
1. Connect device, check fuse.
2. Turn knob on / press power
switch to ON.
3.
Inspect fan wheel and remove
blockage.
4. Remove blockage and clean air
inlet and air outlet.
5. Call Customer Service at
800-641-6996.
6. Call Customer Service.
Motor runs, but wheel
spins irregularly or hits
sides.
1. A heavy impact has bent the
motor suspension so that the
wheel is stuck.
2. A heavy impact has let
the motor slide out of the
suspension so that the wheel is
stuck.
3.
Call Customer Service.
4. Call Customer Service.
Device vibrates
excessively
1. Fan wheel is stuck.
2. Fan wheel is unbalanced.
3.
Fan wheel is bent.
4. Motor Shaft is bent.
1. Clean fan wheel.
2. Call Customer Service.
3.
Call Customer Service.
4. Call Customer Service.
Maintenance
TIP: To order parts call (800)-641-6996
5
