background image

Masterbuilt Manufacturing, Inc.  

1 Masterbuilt Ct.

Columbus, GA

 31907

 Customer Service 1-800-489-1581

www

.masterbuilt.com

Manual Code: 9803100003 110410-17JH

Tool needed for assembly:  Phillips Head Screwdriver

CARBON MONOXIDE HAZARD

W

ARNING

Burning wood chips gives off carbon 

monoxide, which has no odor and

 can cause death.

  

DO NOT burn wood chips inside homes, 

vehicles, tents, garages or any enclosed areas. 

Use only outdoors where it is 

well ventilated.

This manual contains important 

information necessary for the proper assembly 

and safe use of the appliance.

Read and follow all warnings and 

instructions before assembling and using 

the appliance.

Follow all warnings and instructions when 

using the appliance.

Keep this manual for future reference.

Failure to follow these warnings and instructions properly could result in 

fi

 re or explosion, which

 could cause property damage, personal injury

, or death.

ASSEMBL

Y,

 CARE & USE MANUAL

W

ARNING & SAFETY

 INFORMA

TION

TABLET

OP

 PROP

ANE GRILL

 

MODEL

 200301

11

THIS PRODUCT IS FOR OUTDOOR USE ONL

Y

Summary of Contents for 20030111











Reviews: