AUTO CHECK MODE
1.
2.
3.
4.
In Auto Check mode, the meter automatically selects measurement
function of DC voltage, AC voltage or resistance based on the input
via the test leads.
With no input, the display shows " ".
With no voltage signal, but a resistance below 10 MΩ present,
the meter displays the resistance value.
When a signal ≥ DC 1.2 V or AC 1.5 V is present, the display
shows the voltage value in DC or AC, whichever larger in peak
magnitude.
Overload Alarm:
When the input voltage is ≥ 610 V, the built-in buzzer will
sound beeps and the display will show "OL".
12
OPERATING INSTRUCTIONS
Summary of Contents for 052-0726-0
Page 2: ...SMART MULTIMETER 052 0726 0...
Page 43: ......
