13
SETTING THE TORQUE VALUE
When tightening fasteners, the preset
torque value in the LCD window will flash
and the digital torque control will
automatically turn the impact wrench OFF
as soon as the preset torque is reached.
NOTE:
The digital torque control will
function ONLY when the socket is turning
clockwise to tighten the fastener. When the
socket is turning counter clockwise to
loosen the fastener, maximum torque will
be applied to remove the fastener.
To set the digital torque control:
1. Press the LCD display button (1) once
to turn the LCD display light (2) ON
(Fig. 3). Press the LCD display button
a second time to turn the LCD display
light OFF.
NOTE:
The default torque setting of 80
ft/lbs will be visible in the LCD display.
2.
Press the “+” button (3) once to
increase the torque setting to 85 ft/lbs
(Fig. 4).
NOTE:
Each time the “+” button is
pressed, the torque value will increase by
an additional 5 ft/lbs until the maximum
torque value of 350 ft/lbs is achieved.
3. To reduce the torque value, press the
“–“ button (4). Each time the “–“ button
is pressed, the torque value will
reduce by 5 ft/lbs.
NOTE:
Each time the “–“ button is
pressed, the torque value will decrease by
5 ft/lbs until the minimum torque value of
80 ft/lbs is achieved.
ASSEMBLY AND OPERATION
Fig. 3
Fig. 4
Summary of Contents for 054-1265-6
Page 21: ...21 EXPLODED VIEW...
