background image

 

13 

 
 
 

TRIGGER SWITCH LOCK-ON BUTTON

 

 
The trigger switch lock-on feature allows 
the trigger switch to be locked in the ON 
position at full speed when continuous 
operation for extended periods of time is 
required (Fig. 3).  
 
1.  To lock the trigger switch in the ON 

position, pull the trigger switch back 
fully to operate the drill at full speed. 
 

 

2.  While holding the trigger fully back, 

push the lock-on button (3) into the 
drill handle.  

 

3.  Release the trigger switch while 

holding the lock-on button into the drill 
handle. The drill will continue to run.  

 

4.  To release the lock-on button, pull the 

trigger switch back and then release 
the trigger.

 

 

DRILL / HAMMER CONTROL

 

 

The drill / hammer control (1) changes the 
drilling mode between conventional drilling 
and hammer for drilling concrete (Fig. 4). 
To change from drilling mode to hammer 
mode, push the end of the drill / hammer 
control knob (2) inward and rotate the knob 
180° to the hammer mode. Reverse the 
procedure to change from hammer mode 
to drilling mode. 
 

NOTE:

 When the drill / hammer control 

knob reaches the desired position, release 
the end of the drill / hammer control knob 
and move the knob back and forth slightly. 
You will hear the knob lock into position. 
 

ASSEMBLY AND OPERATING 

 

Fig. 3 

 

Fig. 4 

 

      WARNING:

 

Only use the 

hammer function with SDS masonry 
bits. Never use the hammer function 
with high speed steel (HSS) or wood 
boring bits.

 

Summary of Contents for 054-1277-8

























Reviews: