7
20V max* LITHIUM-ION CORDLESS DRILL/DRIVER - 054-3118-6
SAFETY GUIDELINES
Safety guidelines for cordless drill/driver
• Hold power tools by the insulated gripping surfaces when performing an operation where the tool
may contact hidden wiring or its own cord.
Contact with a “live” wire may make exposed metal parts
of the power tool “live” and could give the operator an electric shock.
• When working with the power tool, always hold it firmly with both hands and provide for a secure
stance.
The power tool is guided more securely with both hands.
• Keep the cord and charger from heat to prevent damage to the housing or internal parts.
• Secure the workpiece.
Clamping devices or a vise will hold the workpiece in place more effectively
than your hand can.
• Do not allow gasoline, oils, petroleum-based products, etc., to come in contact with plastic parts.
These materials contain chemicals that can damage, weaken, or destroy plastic.
• Always wait until the machine has come to a complete stop before placing it down.
The tool insert
can jam and lead to loss of control over the power tool.
• Before performing any kind of work on the machine (e.g., maintenance, tool change, etc.) or
when transporting and storing the tool, always set the direction-of-rotation switch to the centre
(locked) position.
Unintentional activation of the On/Off switch may result in personal injury.
• Do not open the battery.
There is a risk of a short circuit.
• Protect the battery from heat and fire.
There is a risk of explosion.
• Wear ear protectors when using the drill/driver.
Exposure to noise can cause hearing loss.
• Use protective gloves when removing the bit from the tool, or first allow the bit to cool down.
The
bit may be hot after prolonged use.
• Use protective gloves when operating the tool.
Protective gloves can help to keep you from being
burnt or injured.
• Keep your hands away from the motor-housing vents.
Hot gas comes from the vents during
operation.
• Release the trigger immediately when a screw is tightened to avoid breaking the screw.
• For best results, your battery tool should be charged in a location where the temperature is more
than 0°C (32°F) but less that 40°C (104°F).
Do not store outside or in vehicles.
Contents
Cordless Drill/Driver, 2 double-ended bits, and Instruction Manual
Summary of Contents for 054-3126-6
