20V max* LITHIUM-ION CORDLESS ANGLE GRINDER- 054-7121-2
20V max* LITHIUM-ION CORDLESS ANGLE GRINDER- 054-7121-2
7
8
• The outside diameter and the thickness of your accessory must be within the capacity
rating of your power tool.
Incorrectly sized accessories cannot be adequately guarded or
controlled.
• The arbor size of wheels, flanges or any other accessory must properly fit the spindle
of the power tool.
Accessories with arbor holes that do not match the mounting hardware of the
power tool will run out of balance, vibrate excessively and may cause loss of control.
• Do not use a damaged accessory. Before each use inspect the accessory such as
abrasive wheels for chips and cracks. If power tool or accessory is dropped, inspect for
damage or install an undamaged accessory. After inspecting and installing an accessory,
position yourself and bystanders away from the plane of the rotating accessory and
run the power tool at maximum no-load speed for one minute.
Damaged accessories will
normally break apart during this test time.
• Wear personal protective equipment. Depending on application, use a face shield, safety
goggles or safety glasses. As appropriate, wear a dust mask, hearing protectors, gloves
and workshop apron capable of stopping small abrasive or workpiece fragments. The eye
protection must be capable of stopping flying debris generated by various operations.
The dust mask or respirator must be capable of filtrating particles generated by your operation.
Prolonged exposure to high intensity noise may cause hearing loss.
• Keep bystanders a safe distance away from work area. Anyone entering the work area
must wear personal protective equipment.
Fragments of workpiece or of a broken accessory
may fly away and cause injury beyond the immediate area of operation.
• Hold the power tool by the insulated gripping surfaces only, when performing an
operation where the grinding accessory may contact hidden wiring or its own cord.
A
cutting accessory contacting a “live” wire may make exposed metal parts of the powertool "live" and
could give the operator an electric shock.
• Never lay the power tool down until the accessory has come to a complete stop.
The
spinning accessory may grab the surface and pull the power tool out of your control.
• Do not run the power tool while carrying it at your side.
Accidental contact with the spinning
accessory could snag your clothing, pulling the accessory into your body.
• Regularly clean the power tool’s air vents.
The motor’s fan will draw the dust inside the housing
and excessive accumulation of powdered metal may cause electrical hazards.
• Do not operate the power tool near flammable materials.
Sparks could ignite these materials.
• Do not use accessories that require liquid coolants.
Using water or other liquid coolants may
result in electrocution or shock.
SAFETY GUIDELINES
Battery tool use and care
• Recharge only with the charger specified by the manufacturer.
A charger that is suitable for
one type of battery pack may create a risk of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs.
Use of any other battery
packs may create a risk of injury and fire.
• When battery pack is not in use, keep it away from other metal objects like paper clips,
coins, keys, nails screws or other small metal objects that can make a connection from
one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, flush with water. If liquid contacts eyes, also seek medical
help.
Liquid ejected from the battery may cause irritation or burns.
Service
• Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained
Safety guidelines for angle grinder
• To reduce the risk of electric shock or damage to the charger and battery, use only the
batteries and charger listed.
Battery pack
Charger
054-3124-0
054-3126-6
054-3125-8
• This power tool is intended to function as a grinder. Read all safety warnings,
instructions, illustrations and specifications provided with this power tool.
Failure to follow
all instructions listed below may result in electric shock, fire and/or serious injury.
• Operations such as sanding, wire brushing, polishing or cutting-off are not recommended
to be performed with this power tool.
Operations for which the power tool was not designed
may create a hazard and cause personal injury.
• Do not use accessories that are not specifically designed and recommended by the tool
manufacturer.
Just because the accessory can be attached to your power tool, safe operation is
not assured.
• The rated speed of the accessory must be at least equal to the maximum speed marked
on the power tool.
Accessories running faster than their RATED SPEED can break and fly apart.
SAFETY GUIDELINES