20V max* LITHIUM-ION CORDLESS ANGLE GRINDER- 054-7121-2
20V max* LITHIUM-ION CORDLESS ANGLE GRINDER- 054-7121-2
15
16
Mounting the wheel
(fig 5-6)
WARNING!
Only use grinding wheels for which the maximum safe operating speed is rated at or
above 13200 RPM. Never use damaged or imbalanced grinding wheels. Do not exceed the
recommended wheel diameter. Grinding wheel type 27 is recommended for use on this
grinder.
WARNING!
Failure to remove the battery pack from the cordless angle grinder when assembling parts,
making adjustments, or changing application tools could result in accidental starting and
cause serious injury.
1. Remove the battery pack from the angle grinder.
2. Make sure that the guard is securely in place.
Depress the spindle-lock button. Loosen the
outer flange with the supplied wrench while
holding the spindle lock button down (fig 6).
3. Place the inner flange on the spindle; make sure
that the flange is positioned so that the shape of
the opening in the flange corresponds with the
shape at the base of the spindle.
4. Place the grinding wheel on the spindle. Check
the rated speed on the grinding wheel. DO NOT
use a wheel with a rated speed lower than the
speed shown on the grinder nameplate.
5. Thread the outer flange on the spindle with the
flat side of the flange facing up, making sure that
the opening in the wheel is positioned around the
raised portion of the outer flange (fig 5).
6. Press the spindle-lock button to prevent
movement of the spindle.
7. Keep the spindle-lock button depressed; tighten
the threaded outer flange by turning it clockwise with the wrench (fig 6).
WARNING!
Keep the guard between you and the wheel. Do not direct the guard opening toward your
body.
Adjust the guard
(fig 4)
WARNING!
Failure to remove the battery pack
from the cordless angle grinder
when assembling parts, making
adjustments, or changing application
tools could result in accidental starting
and cause serious injury.
1. Remove the battery pack from the angle grinder
2. Press the guard-adjusting lever, and hold it to loosen the guard.
3. Rotate the guard to the desired position and make sure the lever lines up with notches on the guard.
4. Release the guard-adjusting lever to lock the guard;verify that the lever secures the guard.
WARNING!
Never use your grinder with the guard removed. It has been designed for use only with the
guard attached. Attempting to use the grinder with the guard removed will result in loose
particles being thrown against the operator and possibly serious personal injury.
WARNING!
Only use the guard with grinding wheels. Make sure that the guard-adjusting lever secures
the guard before operation. Keep the guard between you and wheel. Do not direct the guard
opening towards your body.
OPERA
TING INSTR
UCTIONS
OPERA
TING INSTR
UCTIONS
fig 4
Notch on the guard
Guard-adjusting lever
fig 5
Outer flange
Inner flange
Spindle
Grinding wheel
fig 6
Spindle
lock button
