headline bars
continuation tabs
notes
warnings
9
headline bars
continuation tabs
notes
warnings
model no. 054-7274-8 | contact us 1-800-689-9928
8
PACKAGE CONTENTS:
Detail sander, dust box, 12 sanding sheets (80 grit x 3, 100 grit x 3, 120 grit x 3, 240 grit x 3),
instruction manual.
KEY PARTS DIAGRAM
1
2
No.
Description
No.
Description
1
Dust sealed On/Off switch
2
Dust collection box
SAFETY GUIDELINES FOR DETAIL SANDER
•
Hold the power tool by insulated gripping surfaces when performing an operation
where the cutting accessory may contact hidden wiring or its own cord.
If a cutting
accessory contacts a “live” wire, it may cause the exposed metal parts of the power tool to
become“live” and shock the operator.
•
The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V ..................... Volts
A ..................... Amperes
Hz ................... Hertz
W .................... Watts
min ................. Minutes
................. Alternating current
............. Direct current
n
0
................... No-load speed
............... Class II Construction
…/min ........... Revolutions or reciprocation per minute
............... Grounding terminal
BPM ............... Beats per minute
..............
WARNING – To reduce the risk of injury, user must read instruction manual
.
.............. WARNING – To reduce the risk of injury always wear eye protection.
.............. WARNING – To reduce the risk of injury always wear ear protection.
•
A suitable breathing respirator must be worn while sanding lead paint, some woods
and metal to avoid breathing the harmful/toxic dust or air.
•
Always wear safety goggles and a dust mask when sanding, especially when sanding
overhead.
•
The machine is not suitable for wet sanding.
•
Do not use sanding paper that is larger than needed
. Extra paper extending beyond the
sanding pad can cause serious lacerations.
•
Secure the workpiece.
A workpiece clamped with clamping devices or in a vice is held more
securely than by hand.
•
Attach the dust bag to the tool and empty it frequently.
Do not throw sanding dust on an
open fire, because materials in fine particle form may be explosive.
SAFETY GUIDELINES
KEY P
AR
TS DIAGRAM
FPO
WARNING!
• Remove the detail sander from the package, and examine it carefully. Do not discard
the carton or any packaging material until all parts have been examined.
• If any part of the detail sander is missing or damaged, do not attach the tool to a power
source or use the tool until the part has been repaired or replaced. Failure to heed this
warning could result in serious injury.
• Do not allow familiarity with the detail sander to cause a lack of alertness. A fraction of
a second of carelessness is enough to cause severe injury.
Summary of Contents for 054-7274-8
Page 10: ......
