15
self-levelling cross-line laser level - 057-4587-6
16
self-levelling cross-line laser level - 057-4587-6
avoid using solvents when cleaning plastic parts. most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use. use clean cloths to
remove dirt, dust, oil, grease, etc.
Do not, at any time, allow brake fluids, gasoline, petroleum-based products, penetrating oils,
etc. to come in contact with plastic parts. chemicals can damage, weaken or destroy plastic
which may result in serious personal injury.
When servicing, use only identical replacement parts. use of any other parts may create
a hazard or cause product damage. to ensure safety and reliability, all repairs should be
performed by a qualified service technician.
remove the batteries when cleaning the laser tool.
Storing the self-levelling cross-line laser level
the following steps should be taken in order to prepare the self-levelling cross-line laser level
for storage.
• remove the batteries from the tool and store it in a cool dry location.
• always store the tool indoors. When not in use, always store the tool in its protective case.
• after you have finished using the tool, always make sure that the switch is in the off position.
ProBlem
PossiBle causes
solutions
the laser line
projection is weak
Batteries are weak
replace with new batteries
the laser line is
hard to see
the tool is too far from the target
move the tool closer to
the target
laser line is not
projected
no batteries installed or batteries are
depleted
install new batteries
laser line flickers
for alert
the surface where the tool has been
placed is uneven or the tool is out of
its automatic self-levelling range
1. Place the tool on a more
level surface
2. set the tool to its lock
mode
If the problem remains unsolved after performing the checks described above, call
the toll-free helpline, at 1-800-689-9928.
M
ain
Tenan
Ce
Tro
UB
le
SH
oo
Ting
