7
WARNING:
For your safety, do not
plug the tool into the power source or
install nails or staples in your nailer/stapler
until you have read and understood this
Owner’s Manual.
DANGER:
Never point the
nailer/stapler at anyone.
Always wear safety goggles or face mask.
Use a dust mask along with safety goggles
if the operation is dusty.
Always use hearing protection, particularly
during extended periods of operation.
Do not wear gloves, neckties or loose
clothing.
Do not nail or staple any workpiece that is
too small to be securely held.
Always use a safe method to secure the
workpiece, and use both hands to guide
the tool. Never place your hands near or
below the surface being nailed or stapled.
Always keep your hands on the tool and
not near the nail or staple mechanism.
Avoid awkward hand positions where your
hand could move into the path of the nail
or staple.
Hold the tool by its insulated gripping
surfaces when performing an operation
where the tool, nail or staple may contact
hidden wiring or its own cord. Contact with
a “live” wire will make exposed metal parts
of the tool “live” and shock the operator.
Always make sure the work surface is free
from nails and other foreign objects. Hitting
a nail can cause the nail or staple to bend
and the tool to jump.
Never lay the workpiece on hard surfaces
like concrete, stone, etc. Protruding nails
or staples may cause the tool to jump.
Always place the switch in the OFF
position and remove the plug from the
power source before adding or removing
nails or staples from the magazine.
Always place the switch in the OFF
position and remove the plug from the
power source before servicing the tool or
removing a jammed nail or staple from the
magazine.
SPECIFIC SAFETY RULES
!
!
SAVE THESE INSTRUCTIONS FOR REFERENCE
