MasterCraft 058-8191-0, Instruction Manual

IMPOR

TANT INFORMA

TION

13

AIR

-

POWERED COMPACT COIL ROOFING NAILER  058

-

819

1-

0

Read this Instruction Manual carefully before using the Air

-

powered Compact Coil Roofing Nailer.

•

Read and follow all the safety instructions at the beginning of this manual. Inspect the 
Air

-

powered Compact Coil Roofing Nailer prior to each use in order to:

–

ensure that the proper power source is being used.

–

verify that the tool is in proper working order.

•

It is recommended that a filter

-

regulator

-

lubricator be used and be located as close to the tool 

as possible.

•

If a filter

-

regulator

-

lubricator is not installed, place up to 6 drops of pneumatic tool oil into the 

air inlet plug before each use.

•

If a filter

-

regulator

-

lubricator is installed, keep the air filter clean. A dirty filter will reduce the 

air pressure to the tool, which will cause a reduction in power, efficiency, and general 
performance.

•

For optimal performance, install a quick connector to the tool and a quick coupler on the 
hose, if applicable.

•

Verify that all of the connections in the air supply system are sealed in order to prevent air 
from leaking.

WARNING!

Potential hazard that could result in serious injury or loss of life.

•

Do not use the tool if it is not in proper working order.

•

Do not use oxygen or any other combustible or bottled gas to power this tool.

•

Do not use this tool in the presence of any flammable liquids or gases.

•

Keep hands and other parts of the body away from the firing head during use.

•

Do not point the tool towards the operator or other people.

•

Do not attempt to clear a jammed nail when the air hose is connected.

•

Do not drive a nail on top of an existing nail. Failure to comply could result in 
serious injury or loss of life.