MAINTENANCE
19
AIR
-
POWERED COMPACT COIL ROOFING NAILER 058
-
819
1-
0
Maintenance
•
Air
-
operated tools must be inspected periodically and worn or broken parts must be replaced
in order to keep tools operating safely and efficiently.
DANGER!
Potential hazard that will result in serious injury or loss of life.
•
Disconnect the tool from the air compressor before performing maintenance/
service, adjusting, clearing jams, reloading, and when it is not in use.
•
Repairs must be performed by a qualified service technician only. Failure to
comply will lead to serious injury or loss of life.
MAINTENANCE
REQUIRED
DESCRIPTION
TOOLS OR
MATERIALS
REQUIRED
MAXIMUM SERVICE INTERVAL
Each Use or
every 2 Hrs.
Monthly
As
Needed
General inspection
-
free movement
Trigger, spring,
safety mechanism
None
X
In
-
depth inspection
Worn or broken
parts
X
X
Replace worn or
broken parts
X
Lubrication
See below
Pneumatic tool
oil
X
•
Lubrication: If the Air
-powered
Compact
Coil
Roofing Nailer and the compressor are not
equipped with an in
-
line lubrication system, place
up to 6 drops of pneumatic tool oil into the air inlet
before each work day or after every 2 hours of
continuous use, depending on the characteristics
of the workpiece and type of nails used.
MC-588179-17
Summary of Contents for 058-8191-0
