MasterCraft 058-8191-0, Instruction Manual

SAFETY GUIDELINES

8

AIR

-

POWERED COMPACT COIL ROOFING NAILER  058

-

819

1-

0

CAUTION!

Potential hazard that may result in moderate injury or damage to 
equipment.

•

Always ensure that the tool has stopped before connecting it to the air 
supply.

•

Do not wear watches, rings, bracelets, or loose clothing when using any air 
tool.

•

Do not overload the tool. Allow the tool to operate at its optimum speed for 
maximum efficiency

.

•

Do not use a tool that is leaking air, with missing or damaged parts, or that 
requires repairs. Verify that all screws are securely tightened.

•

For optimal safety and tool performance, inspect the tool daily in order to 
ensure free movement of the trigger, safety mechanisms, and springs.

•

Always keep your air tool clean and lubricated. Daily lubrication is essential 
to avoid internal corrosion and possible failures.

•

Ensure the floor is not slippery and wear non

-

slip shoes. Floor should be 

kept clean and clear.

•

Always follow all workshop safety rules, regulations, and conditions when 
using the Air

-

powered Compact Roofing Nailer.

•

Carry the tool by the handle only, keeping the fingers away from the trigger. 
Do not carry the tool by the hose, magazine, or any other parts. 

•

Do not use the tool near or below the freezing condition, as doing so may 
cause tool failure.

•

Do not store the tool in a freezing environment to prevent ice formation on 
the operating valves of the tool, as doing so may cause tool failure.

•

Handling and storage of oil: Use with adequate ventilation. Avoid contact of 
oil with eyes, skin, and clothing. Avoid breathing spray or mist. Store in a 
tightly closed container in a cool, dry, well

-

ventilated area free from 

incompatible substances.