SAFETY GUIDELINES
5
AIR
-
POWERED SIPHON
-
FEED SPRAY GUN 058
-
9336
-
2
•
Risk of inhalation: Never directly inhale the air produced by the compressor
and the spray gun. Always use the spray gun in a well ventilated area.
Use protective respirator: Toxic vapors produced by spray-
ing certain materials can cause serious damage to health.
Always wear safety es, gloves, and respirator to prevent the
hazard caused by inhalation of toxic vapor or contact of sol-
vent and paint with eyes or skin. Failure to comply will result
in moderate injury.
•
Risk of burns: The pump and the manifold generate high temperatures. In
order to avoid burns or other injuries, do not touch the pump, the manifold,
or the transfer tube while the compressor is running. Allow the parts to cool
down before handling or servicing. Keep children away from the compressor
at all times.
•
Risk of bursting: Do not adjust the pressure switch or
safety valve for any reason. They have been preset at the
factory for this compressor’s maximum pressure.
Tampering with the pressure switch or the safety valve
may cause personal injury or property damage. Make
sure the regulator is adjusted so that the compressor
outlet pressure is set lower than the maximum operating
pressure of the tool. Before starting the compressor, pull
the ring on the safety valve to make sure the valve
moves freely. Drain water from tank after each use. Do
not weld or repair tank. Relieve all pressure in the hose
before removing or attaching accessories.
•
Use compressed air at regulated pressure: Always use
clean, dry, and compressed air at regulated pressure. Do
not exceed the maximum operating pressure of 8.3 bar
(120 PSI)
.
Failure to comply will lead to serious injury or
loss of life.
MC-OM-04
MC-OM-22
MC-OM-06
