11
10
model no. 058-9807-2 | contact us 1-800-689-9928
General use
KEY PARTS DIAGRAM
TECHNICAL INFORMATION
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
Plastic canister
Pattern adjusting knob
Gun body
Air adjusting knob
Trigger
Air cap nozzle and needle
Air inlet plug
Paint adjusting knob
This Mastercraft
®
Air-powered Gravity-feed Spray Gun is an HVLP or high-volume low-pressure
sprayer. This tool applies paint with less force, reducing the bounce of the material from the
surface to be painted. It features a stainless steel needle and nozzle to accommodate a variety of
coatings. The spray gun is capable of forming very large patterns.
Air Compressor
Size and Power
1 1/2–2 HP 2 1/2–3 HP 3 HP and more
5–6 Gallons
8–11 Gallons
15 Gallons
and more
Light-duty and
intermittent use
Light-duty and
intermittent use
Medium-duty and
intermittent use
Light-duty and
intermittent use
Medium-duty and
intermittent use
Heavy-duty and
continuous use
Light-duty and
intermittent use
Medium-duty and
intermittent use
Heavy-duty and
continuous use
Air Compressor
Size and Power
1 1/2–2 HP 2 1/2–3 HP 3 HP and more
4–6 Gallons
8–11 Gallons
15 Gallons
and more
Light-duty and
intermittent use
Light-duty and
intermittent use
Medium-duty and
intermittent use
Light-duty and
intermittent use
Medium-duty and
intermittent use
Heavy-duty and
continuous use
Light-duty and
intermittent use
Medium-duty and
intermittent use
Heavy-duty and
continuous use
Compatible compressors and air tool
Be sure to use the proper air compressor with Mastercraft® air-powered tools. The compressor
should be able to supply a minimal air delivery of 3.4 CFM @ 40 PSI to ensure it can run
continuously with the MAXIMUM® Air-powered Gravity-feed Spray Gun. Using tools or
combinations of tools that together or separately require more than the air compressor can
deliver will reduce performance and could void the compressor or tool guarantee/warranty.
GUIDELINES FOR PROPER USE AND OPERATION
