13
12
model no. 058-9807-2 | contact us 1-800-689-9928
TECHNICAL INFORMATION
OPERATING INSTRUCTIONS
CAUTION!
Incomplete or improper cleaning could cause function failures and degradation
of the tool. Failure to comply may result in moderate injury or damage to
equipment.
•
Storage
• Rotate the paint adjusting knob in a counterclockwise direction and open the knob when the
gun is not in use. This will reduce spring tension on the needle fluid tip.
• Clean the Air-powered Gravity-feed Spray Gun thoroughly and slightly lubricate it after using
and before storing.
POTENTIAL HAZARD THAT MAY RESULT IN INJURY OR DAMAGE TO EQUIPMENT.
CAUTION!
POTENTIAL HAZARD THAT COULD RESULT IN SERIOUS INJURY OR LOSS OF LIFE.
Before assembly and preparation
• Do not exceed the maximum pressure for the Air-powered Gravity-feed Spray
Gun or any other parts in the compressor system.
• Never aim or spray at yourself or anybody else. Failure to comply could result in
serious injury or loss of life.
CAUTION!
POTENTIAL HAZARD THAT MAY RESULT IN MODERATE INJURY OR DAMAGE TO
EQUIPMENT.
• Do not exceed the thinning recommendations of the paint manufacturer. Failure
to comply may result in moderate injury or damage to equipment.
• After unpacking the tool, inspect it carefully and check thoroughly for any damage that may
have occurred during transit. Ensure the tightness of fittings, bolts, etc., before using the tool.
Paint filling
• Mixing and thinning of paint should be performed in accordance with the paint manufacturer’s
instructions. Most materials readily spray if thinning is properly performed.
Note:
Always thin the paint with care.
