7
MOUNTING INSTRUCTIONS
MOUNTING INSTRUCTIONS
STEP 1
Choose a location for the wall cabinet. The recommended height from the floor to the
bottom of the cabinet is 63" (160 cm). Start from one side of the desired location to
find the first screw location for the wall-hanging brackets (10). Use a pencil to mark
the centre of the screw. Then, locate the second screw 16" (40.6 cm) from either
side of the first screw. The distance between the two screws is 16" (40.6 cm) (from
centre to centre).
STEP 2
Drill a small hole (Ø1/8”) at both screw
locations. Use the provided drawing to find the
rest of the screw holes to fasten the wall-hang-
ing brackets (10). Place the drawing on the wall
and align the holes in the drawing with those
already drilled on the wall. Then, drill a small
hole at each of the eight hole locations.
Note:
The shop drawing shows the actual size of the wall
cabinet (28 x 28" / 71.1 x 71.1 cm) and indicates the
locations of the holes on the wall-hanging brackets.
You may also want to temporarily tape the drawing to the
wall for marking the locations of the screws. Use a small
nail to penetrate the shop drawing and mark the eight
points to fasten the wall-hanging brackets.
After marking locations, pre-drill a small hole (1/4"
diameter) at each of the eight hole locations.
FLOOR
DOOR
63" (160 cm)
63" (160 cm)
28" (71.1 cm)
16" (40.6 cm)
1
2
