12. DO NOT OVERREACH. Keep proper footing and balance at all times.
Wear oil-resistant, rubber-soled footwear. Keep floor clear of oil, scrap,
and other debris.
13. MAINTAIN TOOLS PROPERLY. ALWAYS keep tools clean and in good
working order. Follow instructions for lubricating and changing
accessories.
14. CHECK FOR DAMAGED PARTS. Check for alignment of moving parts,
jamming, breakage, or any other conditions that may affect the tool’s
operation. Any part that is damaged should be properly repaired or
replaced before use.
15. MAKE WORKSHOP CHILDPROOF. Use padlocks, master switches, and
ALWAYS remove starter keys.
16. DO NOT operate tool if you are under the influence of any drugs, alcohol
or medication that could affect your ability to use the tool properly.
SAVE THESE SAFETY INSTRUCTIONS
III. Specific safety rules for
wet tile saws
II. General safety rules - continued
4
ALWAYS WEAR EYE PROTECTION.
FLYING DEBRIS CAN GET into your eyes and could
cause permanent eye damage.
ALWAYS wear safety goggles (not glasses). Ordinary
eyeglasses have impact-resistant lenses...they ARE
NOT safety goggles.
WARNING:
DO NOT OPERATE THE WET TILE SAW UNTIL IT IS
FULLY ASSEMBLED, AND YOU HAVE READ AND UNDERSTOOD THE
FOLLOWING INSTRUCTIONS AND THE WARNING LABELS ON THE
WET TILE SAW.
!
MC_WetTileSaw 55-6829 E 3/17/05 4:53 PM Page 4