background image

35

34

model no. 054-1232-4  |  contact us 1.800.689.9928

5-YeAR LIMITed wARRANTY

This Mastercraft Maximum product is guaranteed against defects 
in workmanship and materials for a period of 5 years from the 
date of original retail purchase, with the exception of the following 
components:

a) Component A: Batteries, chargers and carrying case, which are 

guaranteed against defects in workmanship and materials for a 
period of 2 years from the date of original retail purchase;

b) Component B: Accessories, which are guaranteed against 

defects in workmanship and materials for a period of 1 year 
from the date of original retail purchase.

Subject to the conditions and limitations described below, this product, if 
returned to us with proof of purchase within the stated warranty period, and if 
covered under this warranty, will be repaired or replaced (with the same model 
or one of equal value or specification), at our option. We will bear the cost of 
any repair or replacement and any labour costs relating thereto.

This warranty is subject to the following conditions and limitations:

a) A bill of sale verifying the purchase and purchase date must be provided;

b) This warranty will not apply to any product or part thereof that is worn or 

broken, or that has become inoperative due to abuse, misuse, accidental 
damage, neglect or lack of proper installation, operation or maintenance (as 
outlined in the applicable owner’s manual or operating instructions), or that is 
being used for industrial, professional, commercial or rental purposes;

c)  This warranty will not apply to normal wear and tear or to expendable parts 

or accessories that may be supplied with the product and that are expected 
to become inoperative or unusable after a reasonable period of use;

d) This warranty will not apply to routine maintenance and consumable items, 

including but not limited to fuel, lubricants, vacuum bags, blades, belts, 
sandpaper, bits, fluids, tune-ups or adjustments;

e) This warranty will not apply where damage is caused by repairs made or 

attempted by others (i.e.: persons not authorized by the manufacturer);

f)  This warranty will not apply to any product that was sold to the original 

purchaser as a reconditioned or refurbished product (unless otherwise 
specified in writing);

g) This warranty will not apply to any product or part thereof if any part from 

another manufacturer is installed therein or if any repairs or alterations have 
been made or attempted by unauthorized persons;

h) This warranty will not apply to normal deterioration of the exterior finish, 

including but not limited to scratches, dents, paint chips, or to any corrosion 
or discolouring by heat, abrasive and chemical cleaners; and

i)  This warranty will not apply to component parts sold by and identified as 

the product of another company, which shall be covered under the product 
manufacturer’s warranty, if any.

Additional Limitations

This warranty applies only to the original purchaser, and may not be transferred. 
Neither the retailer nor the manufacturer shall be liable for any other 
expense, loss or damage, including but not limited to any indirect, incidental, 
consequential or exemplary damages arising in connection with the sale, use or 
inability to use this product.

Notice to Consumer

This warranty gives you specific legal rights, and you may have other rights, 
which may vary from province to province. The provisions contained in this 
warranty are not intended to limit, modify, take away from, disclaim or exclude 
any statutory warranties set forth in any applicable provincial or federal 
legislation.

IMPORTed bY MASTeRCRAfT CANAdA TORONTO, CANAdA M4S 2b8

w

ARR

ANTY

w

ARR

ANTY

Summary of Contents for MAXIMUM 054-1232-4




















Reviews: