5
4
model no. 054-1232-4 | contact us 1.800.689.9928
TeChNICAL SPeCIfICATIONS
Laser Diode Type
Red Laser Diode 650 nm
Laser Class
Class
Ⅲ
a, power output
≤
2.5 mW
No load Speed
800–3000 SPM
Rated Voltage
120V~, 60Hz
Rated Power Input
6A
Cutting angle range
0–45° left and right
Cutting depth in wood
3 11/32
"
(85 mm)
Cutting depth in steel
1/4
"
(6 mm)
Weight
6 lb 3 oz (2.85 kg)
RULeS fOR SAfe OPeRATION
KNOw YOUR TOOL
To operate this tool, carefully read this Instruction Manual and all labels affixed to
the Orbital Jigsaw before using. Keep this Manual available for future reference.
IMPORTANT
This tool should only be serviced by a qualified service technician. For more
information, call the toll free helpline at 1-800-689-9928.
ReAd ALL INSTRUCTIONS CARefULLY
SAVe TheSe INSTRUCTIONS
geNeRAL POweR TOOL SAfeTY wARNINgS
wARNINg!
Read all safety warnings and instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
SAVe ALL wARNINgS ANd INSTRUCTIONS fOR fUTURe RefeReNCe.
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
wORK AReA SAfeTY
• Keep the work area clean and well lit.
Cluttered or dark areas invite accidents.
• do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks, which may
ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool.
Distractions
can cause you to lose control.
eLeCTRICAL SAfeTY
• Power tool plugs must match the outlet. Never modify the plug in any way. do
not use any adapter plugs with earthed (grounded) power tools.
Unmodified
plugs and matching outlets will reduce the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric shock
if your body is earthed or grounded.
• do not expose power tools to rain or wet conditions.
Water entering a power
tool will increase the risk of electric shock.
• do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep the cord away from heat, oil, sharp edges or moving
parts.
Damaged or entangled cords increase the risk of electric shock.
S
A
fe
TY
g
UI
de
LIN
e
S
T
e
C
h
NIC
AL SP
e
CI
f
IC
A
TIONS
Summary of Contents for MAXIMUM 054-1232-4
Page 19: ......
