manualshive.com logo in svg

MasterCraft NXT20 2017, Owner'S Manual

The MasterCraft NXT20 2017 is a high-performance watercraft engineered with precision and crafted for thrill-seekers. With its cutting-edge features and impeccable design, this boat guarantees an unforgettable experience on the water. To unleash the full potential of this exceptional watercraft, make sure to download the detailed Owner's Manual for free from 88.208.23.73:8080.

Share
Download
background image

2017 OWNERS MANUAL / 

204

Oil Change Reset

Select YES after an engine oil change to reset the internal clock for 
oil change alerts. An Oil Change alert is displayed the first time after 
10 engine hours. Subsequent alerts are displayed at 50 engine hour 
intervals.

Dealer Service Reset

This provides the dealer with the ability to reset the clock. Service 
is required for the engine every 100 hours. When 100 engine hours 
has been reached, an alert is displayed to perform maintenance 
service on the engine. 

NOTE: Access requires a dealer code. If reset is needed please 
contact your dealer.

Engine Diagnostics

For NXT20 Global Edition Models refer to the Mercury SmartCraft 
Owner’s Manual included in the information packet with your boat.

From the Main Menu screen, highlight the Engine Diagnostics 
feature and press the Display Key under SELECT to open the Engine 

Diagnostics screen.

The Engine Diagnostics screen displays active and stored faults. 
When you open the Engine Diagnostics screen, the display will que-
ry the engine(s) ECU and provide feedback on any diagnostic codes 
that have been activated and stored in the ECU for service needs.

To navigate to a feature, press the Display Key under your desired 
feature or action. Use PREV and NEXT to scroll the fault list. Press 
ACTIVE FAULTS to toggle to STORED FAULTS. Press the MENU key 
to go back. Press the HOME key to return to Home.

Engine Diagnostics Screen Field Definitions

SPN (Suspect Parameter Number - Fault Code)

 If not translated into text by the display, see the engine manufac-
turer’s literature for the definition of the SPN number.

FMI (Failure Mode Indicator - Fault Code)

The FMI is defined by SAE J1939. If not translated into text, see the 
SAE standard or the engine manufacturer’s literature.

Description Field

Most common SPNs and FMIs have text for the description stored 
in the display. If there is no text, then this SPN and FMI must be 
defined by referring to the engine manufacturer or the SAE J1939 
standard.

Corrective Action

See dealer

Get Faults

Selecting GET FAULTS queries the Engine Control Unit (ECU) for 
feedback on diagnostic codes that have been activated and stored 
in the ECU for service needs.

Fault Code Pop-Ups

A fault condition will trigger a pop-up dialog box on the screen de-
scribing the nature of the fault.

Factory Settings

From the Main Menu screen, highlight the Factory Settings feature 
and press the Display Key under SELECT to open the Factory Set-
ting screen.

The Factory Settings allow your dealer to customize features. A 
Dealer Code is required to access this screen.

Service Information

From the Main Menu screen, highlight the Service Information fea-
ture and press the Display Key under SELECT to open the Service 
Information screen.

The Service Information screen displays the following features. To 
navigate to a feature, press the Display Key under your desired fea-
ture or action. Use the UP and DOWN pointers to scroll the list and 
highlight a feature and SELECT to open a feature screen. Press the 
HOME key to go back; press it again to return to Home.

Software Version

This screen is an information only screen that provides the  
following:

•  Application version and part number
•  Operating system version and part number
•  Boot loader version and part number;
•  Software version.

Summary of Contents for NXT20 2017















































































































































































































































Reviews:

No comments

Related manuals for NXT20 2017

SeaDoo SPARK 2022 Series Operator'S Manual preview
SPARK 2022 Series
Brand: SeaDoo Pages: 196
Edgewater Networks 225 Express Owner'S Manual preview
225 Express
Brand: Edgewater Networks Pages: 49
Hobie Float Cat 75 Assembly And Operation Manual preview
Float Cat 75
Brand: Hobie Pages: 17
Incept K50D Pacific Manual preview
K50D Pacific
Brand: Incept Pages: 4
SKEETA FOILING CRAFT Nikki 5.5 Rigging Manual preview
Nikki 5.5
Brand: SKEETA FOILING CRAFT Pages: 32
SKEETA FOILING CRAFT NIKKI Rigging Manual preview
NIKKI
Brand: SKEETA FOILING CRAFT Pages: 32
Laser Performance Pico Rigging Manual preview
Pico
Brand: Laser Performance Pages: 18
Mercury 225 OptiMax Service Manual preview
225 OptiMax
Brand: Mercury Pages: 13
Jeanneau MERRY FISHER 695 MARLIN Owner'S Manual preview
MERRY FISHER 695 MARLIN
Brand: Jeanneau Pages: 116
Zodiac MILPRO ERB Series Manual preview
MILPRO ERB Series
Brand: Zodiac Pages: 27
Boston Whaler 350 Outrage Owner'S Manual preview
350 Outrage
Brand: Boston Whaler Pages: 198
Yamaha WaveRunner FX SVHO Practices Manual preview
WaveRunner FX SVHO
Brand: Yamaha Pages: 174
Yamaha FX HO 2019 Owner'S/Operator'S Manual preview
FX HO 2019
Brand: Yamaha Pages: 116
Yamaha WaveRunner VX Cruiser HO 2020 Owner'S/Operator'S Manual preview
WaveRunner VX Cruiser HO 2020
Brand: Yamaha Pages: 110
Gumotex PULSAR 340 User Manual preview
PULSAR 340
Brand: Gumotex Pages: 52
Ocean Alexander Ocean Alexander 520PH Operation Manual preview
Ocean Alexander 520PH
Brand: Ocean Alexander Pages: 31
Oru Kayak Beach LT Owner'S Manual preview
Beach LT
Brand: Oru Kayak Pages: 16
Topper Topaz 16C Rigging Instructions preview
Topaz 16C
Brand: Topper Pages: 13

Brands by name

Popular brands

Load more brands