MasterCraft NXT20 2017 Owner'S Manual Download

Page: 151 / 238

2017 OWNERS MANUAL /

296

The wet bar is located immediately aft of the driver’s seat.

Operation

For the wet bar, ensure that there is water in the freshwater tank.
(See Shower and Wash Down information elsewhere in this section
of the Owner’s Manual.) Flip over the lid that tops the sink to allow
access to the sink area. The knobs turn as they do on land-based
faucets. Note that the water is pressurized so it will come out of the
faucet similar to a land-based sink, with slightly less force. The sink
drains through the boat’s bilge system.

Water available is limited to the amount in the freshwater tank
water from the body in which you are boating is not brought aboard
through this system.

Ensure that the faucet is OFF and the lid secured prior to operation
of the boat. Leaving the lid up while underway can result in damage
that is not covered under warranty.

REFRIGERATION

Model

X26, as an option.

Purpose

The refrigerator is suitable for cooling food and beverages for a day
on the water.

Location

The refrigerator unit is located immediately aft of the driver’s seat,
replacing some storage space.

Operation

The refrigerator operates by opening the cool box drawer and
turning the thermostat knob clockwise. Shutting it off requires
turning the thermostat knob counterclockwise. A booklet from the
manufacturer is also supplied in your owner’s packet. Please review
it prior to operating the refrigerator for the first time.

Special Attention

Note that the refrigerator functions off the boat’s electrical system.
Attention should be paid to the voltmeter(s) to be certain that these
systems do not over-drain the electrical system.

Additional Special Attention

Troubleshooting

If the refrigerator will not turn ON and cool, check the main circuit
breaker box to ensure that the electrical circuit powering the refrig-
erator has not tripped. Re-set as necessary. If the system still does
not work or continues to trip, see an authorized MasterCraft dealer.

If the refrigerator stops working during an outing, move any items
inside to a cooler. The cooling inside the fridge will last for a short
time, but items that require cooling to keep from spoilage may not
be kept at a proper temperature for long enough. Foods or medi-
cines that require cooling but have been in the refrigerator without
it operating for a period of time should be discarded without use.

MasterCraft assumes no responsibility for spoilage resulting from
an inoperable refrigerator or failure to follow directions in use of
the refrigerator.

WET BAR

Model

X26, as an option

Purpose

The wet bar offers an area in which fresh water can be accessed, as
well as allowing water to be conveniently drained.

Location

Food items or anything that can create an odor should not be left in
the refrigerator or cold plate areas. Neither should anything that can
leak be left in these units because they could potentially damage
the units, and this type of damage is not covered under warranty.
The condenser on the refrigerator should be kept free of dust, dirt
and anything that inhibits its proper operation. The manufacturer
also recommends leaving the door slightly open if it will not be used
for an indeterminate period of time. This helps prevent unpleasant
odors from forming. Refrigerator cleaning instructions have been
provided by the manufacturer. Note that it should always be OFF,
and should never be cleaned under flowing water or submerged in
any kind of body of water. Do not use abrasive cleaning agents. If it
is necessary to defrost the interior, never remove layers of ice with
hard or sharp tools because they can damage the plastic of the
vaporizer. Allow the unit to air defrost.