Underway
If the oil pressure gauge indicates low or no oil pressure, immediately stop the boat as outlined below
and check the oil level. If the temperature gauge indicates overheating, immediately stop the boat as outlined
below and check the raw water impeller for blockage. DO NOT operate the boat until the cause for the warn-
ing has been found and corrected.
Continued operation after the warning light has illuminated may cause severe engine damage.
This will void your warranty.
Stopping
Step 1:
Slowly bring the control lever to the neutral position. If the boat has been driven for a long period
of time or at high speed, allow the engine a 2-3 minute cool-down period at low idle (600-800
RPM).
Step 2:
Turn the ignition key to the OFF position to stop the engine.
Step 3:
If any problems were encountered during operation, have the boat inspected by an authorized
MasterCraft dealer. Request any necessary repairs before resuming operation of the boat.
2011 Owners Manual...Starting and Basic Operation...Page 10-3
Summary of Contents for prostar 190 2011
Page 26: ...Guide to Individual Models 2011 Owners Manual Guide to Individual Models Page 4 1...
Page 81: ......
Page 93: ......
Page 105: ......