After Each Use
• Refer to the
Cleaning the Boat
and
Corrosion Prevention
sections of this Owner’s Manual for guidance on a
thorough approach to maintenance. Also pay attention to the information provided regarding the mainte-
nance of teak platforms and accessories because the wood requires periodic maintenance as well.
• Boats equipped with an optional flushing system for use in salt water or brackish water should
operate the flushing system.
Quarterly (Every Fifty [50] Hours)
Note: MasterCraft recommends that the following functions be performed by authorized Master-
Craft technicians at an authorized MasterCraft dealer.
Before the engine has been started or after it has cooled:
• Lubricate the engine starter gear and shaft.
• Check the safety equipment.
Annually (Every One Hundred [100] Hours)
Note: MasterCraft recommends that the following be per-
formed by authorized MasterCraft technicians at an autho-
rized MasterCraft dealer.
Before the engine has been started or after it has cooled:
• Replace the fuel filter (to be performed by an authorized Mas-
terCraft technician only).
• Check the propeller shaft coupler alignment.
• Lubricate the steering system.
• Lubricate the throttle and shift cables.
• Check the engine mounts.
• Inspect the complete fuel system for leakage.
• Check the fire extinguisher and suppression units on-board.
Details follow in the next few sections.
MasterCraft recommends that many of these functions be performed by authorized MasterCraft
technicians at an authorized MasterCraft dealer!
2011 Owners Manual...Scheduled Maintenance Service...Page 16-2
Summary of Contents for prostar 190 2011
Page 26: ...Guide to Individual Models 2011 Owners Manual Guide to Individual Models Page 4 1...
Page 81: ......
Page 93: ......
Page 105: ......